← All guides
Commercial safe guide

Fire ratings for business safes.

A fire rating tells you how long a safe keeps its interior below the temperature that destroys what's inside. For a business, the right rating depends less on the safe and more on what you're protecting: paper records, backup media, or cash.

Start here

How to read a fire rating.

A fire rating has two parts: a time and an interior temperature limit. "UL Class 350, 1 hour" means that during a one-hour furnace test, the temperature inside the safe stayed below 350°F.

The interior limit is set by what the safe is meant to protect. Paper chars at roughly 400°F, so 350°F protects documents. Hard drives, backup tapes, and other media fail at far lower temperatures, so they need a lower limit.

No safe is fireproof. A fire-rated safe resists heat for a tested period. And unless a safe is specifically tested for water, don't assume it keeps out water from sprinklers or hoses.

Fire ratings explained by our team at Safe and Vault Store. The same ratings apply to commercial safes.
The standard

UL fire classes.

UL tests fire-resistant safes and record containers under UL 72. The class tells you what the safe protects:

Class Protects Interior must stay below
Class 350 Paper documents and records 350°F
Class 150 Magnetic tape and photographic film 150°F and 85% humidity
Class 125 Digital media such as hard drives and backup media 125°F and 80% humidity

Ratings are listed in hours, commonly from 30 minutes to 2 hours or more. A longer rating buys more time when fire response is slow or a fire burns longer.

How safes are tested

Three tests, three different failures.

Fire endurance

The safe is heated in a furnace for its rated time while sensors track the interior temperature, including during cool-down.

Explosion hazard

The safe is exposed suddenly to high heat to make sure moisture in the insulation doesn't turn to steam and burst it open.

Fire and impact

After heating, the safe is dropped about 30 feet onto rubble, as if a floor gave way, then checked to confirm it stayed closed and still protects.

Not every fire-rated safe passes all three. If your safe will sit on an upper floor or a mezzanine, look for a rating that includes the impact test.

Other labs and standards

  • ETL (Intertek): an independent lab that runs fire tests with protocols similar to UL's.
  • KS (Korea) and JIS (Japan): national standards seen on many imported fire safes, with interior limits of 350°F for paper.
  • Factory tested: the manufacturer ran its own test. It can still mean real protection, but no third party verified it.
Matching the rating

What to look for, by what you store.

Contents Look for Why
Contracts and records Class 350, 1 hour or more Originals that are hard or impossible to replace
Backup drives and media Class 125 A 350°F safe can get hot enough inside to destroy them
Cash Class 350 plus a burglary rating Cash burns, and it's what burglars want
Jewelry and inventory A UL burglary rating first, fire as a second layer Theft is the bigger risk your insurer looks at
Controlled substances The burglary standard that applies to you DEA storage rules address theft and diversion, not fire
Two different jobs

A fire rating says nothing about theft.

Fire protection comes from insulation. Burglary protection comes from steel, composite fill, and boltwork. Many fire safes use thin steel around a thick fire liner, so they hold up well in a fire and poorly against a pry bar.

If you need both, look for a safe rated for both. Composite high-security safes often carry a fire rating alongside their burglary rating. The AMSEC AMVAULT CF series, for example, pairs a UL TL-30 burglary rating with a two-hour fire rating. See our burglary ratings guide for the theft side.