- UL TL-15 rated body, composite construction
- UL Type 1 ESL10XL electronic lock standard, other locks available
- Compact 0.95 cubic foot interior, 485 lbs
- The smallest safe in AMSEC's MAX series
Smash-and-grabs and after-hours break-ins are a constant risk for jewelers, and your insurer looks closely at your safe's rating. Our non-commissioned specialists pick a UL TL-rated safe that meets your underwriter's requirements, ships nationwide, and refers you to a local installer if you need one.
Jewelry stores face smash-and-grabs during the day and sophisticated break-ins after hours. How much inventory your jewelers block policy covers depends partly on how that inventory is protected, and the safe is a big part of that.
Underwriters look at your safe's UL burglary rating, your alarm, and your location when they decide how much inventory they will cover. Inventory above your policy's limit is not covered.
A monitored alarm alerts police, but it does not stop a crew already inside. Inventory locked in a UL TL-rated safe is not sitting in the case they are smashing.
Many jewelers block policies spell out safe requirements, such as the rating and how much inventory must be locked up overnight. Confirm them with your agent before you buy, not after a claim.
A monitored alarm calls for help, but it doesn't stop someone who is already inside. Your safe is the physical barrier between an attacker and your inventory.
Jewelers block underwriters set inventory limits based on your safe's UL rating, your alarm, and your location. Higher ratings generally qualify for higher limits. The exact dollar amounts come from your policy and vary by carrier.
| UL Rating | Tested to resist | Typical fit |
|---|---|---|
| 5 minutes of attack with common hand tools | Built for homes, not store inventory | |
| 15 minutes of attack with hand, mechanical, and electric tools on the door and front | Lower inventory values | |
| 30 minutes of attack with a wider set of tools, including power saws and cutting wheels, on the door and front | Higher inventory values | |
| The TL-30 test applied to all six sides | Higher values, or a safe exposed on its sides, back, or top | |
| 30 minutes of attack with tools and cutting torches on all six sides | The highest inventory values |
Ratings are UL Net Working Time: the test clock runs only while tools are on the safe. Ask your agent which rating your policy requires for your inventory value, and we will match a safe to it.
Insurance-rated construction is the floor. These three features make the difference between a safe that satisfies your underwriter and a safe that actually fits how a jeweler operates.
Electronic locks with individual employee codes and an audit trail that shows who opened the safe. Useful for staff turnover, dispute resolution, and insurance claim documentation.
Time delay locks make anyone, including a robber at the counter, wait before the safe will open, and two-person opening rules mean no one employee can open it alone. Both deter robberies and inside jobs. Some underwriters require them for the highest coverage tiers.
TL ratings assume the safe is anchored. We can refer you to local installers who handle bolt-down, slab work, and removal of your old safe if needed.
Every safe here carries a UL TL burglary rating. Pick by inventory value, not by guesswork.
From your first call to a safe that meets your policy, in your store.
Your inventory value, what your insurer requires, your floor space, and any existing alarm system. A specialist follows up during business hours.
You get 1 to 3 specific recommendations sized to your store and rated to what your policy requires. No pressure, no commission, no upsell.
Freight delivery to your store nationwide. We can refer you to a local installer if you need professional placement and anchoring.
If your question isn't here, our specialists answer it on a call.
Yes. Jewelers block insurers look at your safe's UL burglary rating, along with your alarm and location, when they set how much inventory they will cover. Higher ratings generally qualify for higher limits, but the dollar amounts are set by your policy and vary by carrier. Ask your agent what rating your policy requires for your inventory value, and we will match a safe to it.
A TL-15 safe is UL-tested to withstand 15 minutes of attack by common tools (drills, chisels, hammers). Most use composite construction: steel plates around a high-density, drill-resistant fill. Your underwriter decides how much inventory a TL-15 can protect under your policy.
Usually. Jewelers block coverage depends on your security setup, and many policies require a monitored alarm, often with central-station monitoring (24/7 professional monitoring with police dispatch). A local alarm that only makes noise often does not qualify. Your policy spells out exactly what is required.
This is the most common misconception. Net Working Time is a UL lab metric: the clock stops the moment the tool leaves the safe. A TL-30 rating means a skilled test team with the specified tools needed at least 30 minutes of actual tool time to get in. In a real break-in, setup, noise, and the alarm response all add to that, so treat the rating as a fair way to compare safes rather than a prediction of how long a burglary takes.
A safe is the only physical barrier between a smash-and-grab crew and your inventory. Smash-and-grab crews are in and out fast, and they go for display cases because they are the easiest target. Inventory moved into a TL-rated safe after hours, or kept there during the day, is not in the case. Your alarm catches the entry; your safe protects what matters.
UL's TL ratings require the safe to weigh at least 750 lbs or come with instructions for anchoring it, and most TL-rated safes weigh well over that. Large TL-30×6 units can exceed 2,000 lbs. Your underwriter may have its own anchoring requirements. The TL-rated safes we sell include anchor holes, and we can recommend a local installer if your floor needs professional bolt-down.
We don't install safes ourselves, but we refer customers to independent installers across the U.S. After purchase, we recommend a local installer who can handle delivery to your specific space, bolting, alignment, and removal of your old safe if needed. Installation is quoted separately by the installer.
Warranty depends on the manufacturer and model. The TL-rated safes we carry come from AMSEC, Hayman, Hollon, Pacific Safe (Omni-Vault), and Stealth, and each manufacturer sets its own terms for the body, the lock, and fire or burglary replacement. We list the exact warranty for the safe you choose in your quote.
A jewelers safe specialist will reach out during business hours (Mon-Fri 8a-5p PT) to scope your needs, send a quote, and answer any insurance or rating questions you have.