← All guides
Commercial safe guide

Burglary ratings for business safes.

Your insurer, your regulator, and your own risk all come back to one question: how long will this safe hold once someone starts working on it? Here's what each rating actually tells you, and which ones were earned in a lab.

Start here

Built to a spec, or tested in a lab.

Every burglary label on a safe falls into one of two groups, and the difference matters more for a business than for anyone else.

Construction ratings

B-rate C-rate

Describe what the safe is made of: steel thickness and a lock. No lab attacks the finished safe, and no organization enforces the definitions, so the same label can mean different steel from different manufacturers.

Tested ratings

UL RSC UL TL-15 UL TL-30 TRTL

Earned when Underwriters Laboratories (UL) technicians attack production safes with specified tools and certify how long they held. A UL label is something your underwriter or inspector can verify.

If your insurer, a state regulation, or a corporate security standard names a safe requirement, find out exactly which rating it names. That's the number to build your purchase around.

The ratings

What each rating means.

Rating Type What it tells you
B-rate Construction A steel box with a lock. Body and door thickness vary by manufacturer and are thinner than a C-rate.
C-rate Construction Commonly defined as a 1/2" steel body and a 1" steel door with a lock.
UL RSC UL 1037 Resisted 5 minutes of attack by one technician using common hand tools such as pry bars, chisels, and hammers. A residential rating.
UL TL-15 UL 687 Resisted 15 minutes of net working time on the door and front face, against hand tools, picking tools, power tools, grinding points, carbide drills, and pressure devices.
UL TL-30 UL 687 The same test run for 30 minutes, with abrasive cutting wheels and power saws added to the tool list.
UL TL-30x6 UL 687 TL-30 performance on all six sides of the safe, not just the door and front face.
UL TRTL-30x6 UL 687 30 minutes against tools and cutting torches (the "TR"), on all six sides.

What a UL TL safe has to be before it's tested

A TL rating isn't only a test result. To qualify at all, a safe must:

  • Weigh at least 750 pounds, or come with instructions for anchoring it in place
  • Have body walls equivalent to at least 1" of open-hearth steel with a minimum tensile strength of 50,000 PSI
  • Use a UL listed Group 2, Group 1, or Group 1R combination lock, or a UL listed Type 1 high-security electronic lock

In the test, "entry" means opening the door or making a 6-square-inch opening all the way through the door or front face.

AMSEC AMVAULT TL-30 safes, the composite line we recommend for pharmacies, jewelers, and dispensaries.
What the UL RSC rating covers, and why it sits below the TL ratings.
Common misunderstanding

What "15 minutes" and "30 minutes" really mean.

UL ratings use net working time: the clock runs only while tools are actually on the safe. Setup, tool changes, and breaks don't count. A TL-30 safe held for 30 minutes of hands-on work by experienced technicians who knew the design and had the right tools ready.

That makes the rating a standardized way to compare safes, not a stopwatch for a break-in at your location. A real burglar doesn't know your safe, may not have the right tools, and is working against your alarm.

Weight, anchoring, and alarms do part of the job. Weight and anchoring keep the safe where it is, so any attack has to happen on site. The rating measures how long the safe holds once that attack starts. An alarm limits how long anyone can stay. Insurers often ask about all three.

A TL-30 safe under attack at UL. Video by FireKingFan on YouTube.
Matching the rating

Where to start, by business type.

These are starting points for a conversation, not requirements. Your insurer's or regulator's written requirement always wins.

Jewelers

Jewelers block policies usually tie coverage to the safe's UL rating and your alarm. Get the requirement in writing from your underwriter before you buy. Jewelry safes

Pharmacies

For Schedule II, we recommend a UL TL-30 safe with a UL Group 1R lock, bolted down. Read what the DEA actually requires. Pharmacy safes

Convenience stores

Drop and depository safes keep cash out of the till during the shift. If cash stays on site longer or amounts grow, ask about a TL-rated safe. C-store safes

Cannabis

Many states set their own security rules for product and cash storage, and insurers add theirs. Check your state's rules first. Cannabis safes

Bigger than a safe

Vault doors and modular vaults.

Vault doors and modular vault panels are rated under a separate standard, UL 608, by how long they resist attack with mechanical tools, electric tools, and cutting torches:

UL 608 class Net working time
Class M 15 minutes
Class 1 30 minutes
Class 2 1 hour
Class 3 2 hours

UL 608 doesn't cover attacks with a burning bar (thermal lance) or explosives.

Before you buy

Check the label, not the listing.

  • Look for the UL label on the safe itself, usually inside the door. It names the exact rating.
  • A UL listed lock isn't a UL rated safe. Many safes use a UL listed lock on a body that was never tested.
  • Match the exact wording. If your policy says TL-30x6, a TL-30 doesn't meet it.
  • Ask about fire, too. Burglary and fire protection are engineered separately. See our fire ratings guide.